- Lawn Mowing Simulator 2 full gameplay walkthrough: Start your company, test equipment, and accept simple contracts first.
- Mowing basics: Set the deck height, engage the blades, use controlled passes, and watch your vehicle condition.
- First contract: Complete the ground check before mowing to find objects and protect your final reward.
- Equipment path: Add a grass trimmer and leaf blower after the opening mowing job.
- Accuracy tip: Use slower cruise control and overlap each pass to reduce missed grass and damage.
Lawn Mowing Simulator 2 Full Gameplay Walkthrough: Starting Setup
Begin by creating the company that will carry your career. Choose a business name, logo, colors, character appearance, and work uniform. These options are primarily cosmetic, but they establish the identity shown on your vehicles and company interface.
The opening sequence introduces the business hub, equipment manager, contracts, and basic mower controls. Take time to test each available mower before committing. The most important differences are deck height, handling, engine behavior, and how comfortable the mower feels around obstacles.
Video Highlights:
- Company creation, logo selection, and character customization
- Testing the opening mower options
- Learning deck height, blade, camera, and cruise-control functions
- Accepting the first low-complexity mowing contract
| Setup Task | Recommended Approach | Why It Matters |
|---|---|---|
| Company name | Choose a clear name you will recognize | It identifies your business throughout the career |
| Logo and colors | Pick a simple high-contrast design | The logo appears on vehicles and company materials |
| Character gear | Select practical-looking workwear | Cosmetic choice with no reported effect on contract performance |
| Mower testing | Try deck height, turning, and cruise control | Early testing reduces mistakes on paid jobs |
| Equipment manager | Review available tools before accepting work | Each contract can require different equipment |
Deck Height
Match the mower deck to the requested grass height. Cutting too low can create penalties.
Blade Control
Lower the deck before engaging the blades. Confirm the mower is actually cutting before moving.
Cruise Control
Use a moderate speed for long passes. Lower speed gives you more time to correct your line.
Camera View
Switch perspective when corners or obstacles become difficult to judge.
Spend a few minutes with every starter mower. The best opening choice is the machine you can steer and align consistently, not simply the one with the highest displayed performance.
First Contract Route and Ground Check
The first contract teaches the basic work loop: inspect the lawn, remove objects, mow to the target height, load the equipment, and return to headquarters. Read the contract objectives before leaving because a job may include more than cutting grass.
Start with the ground check. Walk around the property and pick up highlighted objects by hand. The first contract includes several lawn objects, and removing them before mowing prevents avoidable collisions. The objective indicator in the upper-right corner shows the current task and progress.
Once the ground check is complete, set the deck inside the requested range. A target such as 2.5 to 3.5 requires careful adjustment rather than simply lowering the mower as far as possible.
Read the Contract
Check the complexity, estimated time, required tasks, target height, and equipment restrictions before assigning yourself to the job.
Inspect the Lawn
Walk the property and collect visible objects. Use the task indicator or highlighting view when an item is difficult to spot.
Set the Mower
Lower the deck to the required range, engage the blades, and begin with a slow, straight pass along the open section.
Mow in Controlled Lines
Overlap each pass slightly so narrow strips of uncut grass do not remain between the mower tracks.
Finish and Return
Load the mower, enter the truck, return to headquarters, and collect the contract reward from the office computer.
| Contract Phase | Main Action | Common Mistake |
|---|---|---|
| Ground check | Pick up lawn objects | Driving over objects before collecting them |
| Height setup | Set the deck within the target range | Beginning with the deck too low |
| Open mowing | Use long, controlled passes | Driving at maximum speed immediately |
| Edge work | Approach benches, walls, and borders carefully | Turning sharply into scenery |
| Completion | Load equipment and return to headquarters | Leaving without checking the objective progress |
Collisions can damage the vehicle, while running the blades over hard surfaces can affect the blade condition. Leave a small safety margin around obstacles and use other tools for tight edges when available.
Mowing Technique, Damage Control, and Accuracy
The central skill is maintaining a clean route without rushing. Begin in the largest open area, then work toward borders and obstacles. A straight-line pattern is easier to monitor than constantly changing directions, especially while learning the mower’s turning radius.
Use cruise control only after the mower is aligned. A lower setting helps maintain consistent passes and makes it easier to stop before a bench, wall, mailbox, or vehicle. When approaching an obstacle, release the throttle early and reposition instead of forcing a sharp turn.
The grass can be difficult to read because mower wheels flatten it. If you are unsure whether a patch has been cut, change the camera angle or use the game’s highlighting assistance. This is particularly useful during the final few percentage points of a contract.
| Problem | Cause | Better Response |
|---|---|---|
| Missed strips | Passes are too far apart | Overlap the previous cut slightly |
| Uneven route | Turning too sharply | Use wider turns in open space |
| Vehicle damage | Contact with scenery | Slow down before obstacles |
| Blade damage | Cutting across hard ground | Lift or disengage the blades |
| Slow progress | Excessive repositioning | Start with long passes in the open area |
| Unclear progress | Flattened grass hides the cut line | Change view or activate task highlighting |
Practical mowing pattern:
- Identify the longest open edge of the lawn.
- Make a straight pass toward the opposite side.
- Turn outside the main cutting area when possible.
- Return with a small overlap.
- Leave corners, narrow strips, and obstacles for the end.
- Use the trimmer later when the required equipment is available.
Open-Lawn Route
Best for large areas. Use long parallel passes and moderate speed to build progress quickly.
Obstacle Route
Best around benches, trees, and mailboxes. Leave space, then clean the edge with a smaller tool.
Final-Pass Route
Best for missed patches. Use highlighting assistance and inspect corners before ending the contract.
A slower, repeatable mowing pattern usually produces a better result than rushing at maximum speed. Consistent overlaps also make the final inspection much easier.
Early Equipment Progression and Job Types
After the first mowing contract, use the earnings to expand the equipment available to your company. The early progression introduces a grass trimmer, leaf blower, rake, and contracts that require different approaches.
A trimmer handles edges and spaces that are difficult to reach with a mower. It is especially useful around walls, borders, and decorative objects. A leaf blower is used for debris tasks, but the objective determines whether you only need to clear a path or gather debris onto a disposal tarp.
The next jobs demonstrate why reading the objective matters. A weed-control contract may ask you to remove weeds and clear debris from a specific surface. A debris-disposal contract requires you to gather the material, position it on the tarp, and return the tarp to the truck.
| Equipment | Main Use | Early-Game Priority |
|---|---|---|
| Mower | Cuts broad grass areas | Starting priority |
| Grass trimmer | Handles edges and tight spaces | Buy after the first mowing reward |
| Leaf blower | Moves leaves and loose debris | Needed for clearance contracts |
| Rake | Gathers or compacts debris | Useful when debris resists the blower |
| Disposal tarp | Holds collected debris | Required for disposal objectives |
Buy the Grass Trimmer
Add a trimmer after the opening mowing job so narrow edges no longer depend entirely on the mower.
Add the Leaf Blower
Purchase the blower before accepting weed-control or debris-clearance work.
Read the Surface Objective
Check whether the contract asks you to clear a path, move debris, or dispose of the material.
Work From the Outside In
Push leaves and debris toward a controlled collection area rather than scattering them across the property.
Secure the Finish
Confirm the percentage objective, return the tarp when required, and load every tool before leaving.
“Clear” and “dispose” are different tasks. Clearing a path may only require moving leaves away, while disposal work requires gathering them onto the supplied tarp and returning it to the truck.
Career Checklist, Rewards, and Common Questions
The early career loop becomes more reliable when you treat each contract as both a job and a maintenance check. Return equipment properly, inspect its condition between contracts, and use new earnings to unlock tools that support more complex objectives.
The first gameplay cycle also establishes the long-term rhythm: complete contracts, gain reputation, purchase equipment, service machines, and prepare for new job types. Do not spend all available funds immediately if the next contract requires a tool you have not purchased.
Early Career Checklist:
- Create the company name, logo, character, and uniform
- Test the starter mowers before selecting equipment
- Complete the first ground check and mowing contract
- Buy a grass trimmer and leaf blower
- Service equipment and review new contract requirements
| End-of-Job Check | Reason |
|---|---|
| Contract progress | Confirms the required percentage has been reached |
| Equipment loaded | Prevents leaving tools behind |
| Vehicle condition | Helps avoid carrying damage into the next job |
| Reward collected | Adds earnings and tips to the company budget |
| New contracts reviewed | Shows which tools or job types come next |
Q: What should I do first in a Lawn Mowing Simulator 2 full gameplay walkthrough?
Create the company, test the starter mowers, review the first contract, and complete the ground check before cutting the lawn.
Q: Should I mow at maximum speed?
Usually no. Moderate speed gives you better control, reduces missed strips, and makes it easier to avoid collisions and engine strain.
Q: Why is the ground check important?
The ground check identifies and removes objects from the lawn before mowing. It also helps you understand the property layout and avoid damaging equipment.
Q: When should I buy a grass trimmer and leaf blower?
Buy the grass trimmer after the first mowing reward, then add the leaf blower before accepting contracts focused on weeds, paths, or debris.
For additional background on the original series’ control concepts and job structure, see the Lawn Mowing Simulator Basic Walkthrough on Steam Community. The sequel’s opening contracts still benefit from the same broad principles: inspect first, mow carefully, maintain equipment, and match tools to objectives.
Before every contract, ask three questions: what must be removed, what tool is required, and what condition must the lawn reach? This short check prevents most early mistakes.