- Lawn Mowing Simulator 2 starting a lawn mowing business begins with selecting equipment and accepting a contract.
- Mow efficiently by creating an outer pass before cutting the main lawn.
- Clear weeds early around fences, posts, trees, and hard surfaces.
- Use the blower and tarp to gather leaves into a manageable collection route.
- Finish contracts carefully by returning equipment and meeting every cleanup requirement.
Lawn Mowing Simulator 2 Starting a Lawn Mowing Business
Lawn Mowing Simulator 2 turns lawn care into a management-focused career where each contract combines driving, mowing, trimming, weed clearance, and leaf disposal. The sequel moves the business to the USA and expands the career structure with a fully explorable headquarters, new locations, changing garden layouts, and licensed equipment from Kubota, STIGA, and SCAG.
The best opening strategy is not simply to drive onto the largest patch of grass and cut randomly. Treat every job as a small worksite. Review the objectives, stage your equipment, make a clean perimeter pass, and then work inward with consistent lines. This reduces missed patches and limits unnecessary repositioning.
Video Highlights:
- The demo begins with a contract at a large water-tower location.
- Mowing, string trimming, weed removal, leaf blowing, and collection are shown together.
- The zero-turn mower supports fast turns and broad cutting passes.
- A tarp, rake, and leaf blower create a separate cleanup workflow.
- Contract completion requires returning equipment and driving the truck away.
| Business Task | Main Objective | Recommended Opening |
|---|---|---|
| Mowing | Cut the required grass percentage | Make a perimeter pass, then use parallel lines |
| Weed clearance | Remove weeds from grass, cracks, and hard surfaces | Complete edges before the final mowing pass |
| Trimming | Reach narrow areas near obstacles | Work around trees, posts, fences, and borders |
| Leaf cleanup | Gather leaves and grass clippings | Place the tarp near a clear collection route |
| Contract closeout | Finish requirements and leave the site | Return tools, load equipment, and exit with the truck |
Your first contract is also a route-planning lesson. A tidy perimeter makes every later pass safer, faster, and easier to inspect.
Mowing Route
Start with a wide outside pass. This creates room to turn and protects landscaping from repeated close approaches.
Detail Work
Use the string trimmer for stubborn weeds and narrow edges that the mower cannot reach cleanly.
Cleanup Flow
Push leaves toward the tarp instead of scattering them across the worksite. Shorter collection routes save time.
Step-by-Step Contract Opening
Before accepting a job, decide how you will move through the site. Lawn Mowing Simulator 2 supports different camera views, including first person and third person. First person can help with precision around obstacles, while third person offers a better overview of the whole lawn.
The following sequence works well for early contracts and remains useful as locations become more complicated.
Review the Contract Requirements
Check the required mowing, weed, leaf, and disposal percentages. Do not assume every visible task is mandatory, but remember that extra cleanup can improve the quality of your finished job.
Choose and Stage the Equipment
Select the mower first, then identify the string trimmer, leaf blower, rake, and tarp. Keep tools positioned where you can return to them without crossing the same area repeatedly.
Prepare the Edges
Trim or clear weeds around trees, posts, fences, hardscaping, and other obstacles. This creates a buffer before the mower enters the main lawn.
Cut the Main Grass
Engage the blades and make long, consistent passes. Use the mower width as your visual guide and overlap slightly when necessary to avoid thin uncut strips.
Complete Cleanup and Exit
Gather leaves with the blower and rake, collect them on the tarp, return the equipment, and drive the truck away only after the contract requirements are complete.
| Phase | Tool Focus | Efficiency Goal | Common Mistake |
|---|---|---|---|
| Setup | Mower and tool staging | Reduce backtracking | Starting without checking objectives |
| Edge preparation | String trimmer and rake | Make obstacle zones safe | Leaving weeds beside fences |
| Main cut | Zero-turn mower | Keep passes long and straight | Chasing small patches too early |
| Leaf collection | Blower, tarp, rake | Build one controlled leaf route | Blowing leaves into corners |
| Closeout | Truck and equipment | Finish without a second trip | Leaving tools scattered or missing |
The contract is not finished just because the lawn looks clean. Confirm the progress counters, recover the equipment, and leave through the truck interaction.
Equipment Roles and Mowing Techniques
The mower is the center of the business, but every tool has a specific purpose. The demo features the Kubota Z422 KWN C54 zero-turn mower, which can accelerate, reverse, steer, and turn sharply without a traditional three-point maneuver. Its speed is useful on open lawns, but the quick steering also makes small corrections more difficult.
A reliable route begins with a border pass. Leave enough space around trees, foundations, posts, and landscaping to avoid cutting too close. After the border is established, run long lines through the center. For irregular areas, divide the lawn into smaller sections instead of trying to force one route across the entire property.
Zero-Turn Mower
Best for open grass and broad commercial areas. Use long lines and wide turns to take advantage of its maneuverability.
String Trimmer
Best for weeds and narrow strips beside patios, fences, posts, and hard surfaces. Use the highlight tool to find missed patches.
Leaf Blower and Tarp
Best for moving large quantities of leaves toward a collection point. Use the rake when leaves settle in tight corners.
| Equipment | Best Use | Handling Advice |
|---|---|---|
| Zero-turn mower | Large grass areas | Set a perimeter before long interior passes |
| String trimmer | Weeds and tight borders | Sweep slowly around landscaping and structures |
| Leaf blower | Open leaf piles and grass clippings | Blow with purpose toward the tarp |
| Rake | Corners and obstructed spaces | Pull leaves away from bushes, posts, and truck edges |
| Tarp | Temporary leaf collection | Place it where several routes can converge |
Use the mower’s visible cut line as feedback. The contrast between cut and uncut grass is one of the sequel’s important visual improvements, and it makes route errors easier to identify. If a strip looks uncertain, finish the surrounding section first and return to it during the inspection pass.
For a rectangular lawn, use one or two perimeter passes, then mow in straight lines. For an obstacle-heavy lawn, split the space into islands and complete each island separately.
Managing Weeds, Leaves, and Difficult Areas
Starting a lawn mowing business in Lawn Mowing Simulator 2 requires more than cutting grass. Weeds can grow through cracks and along hard surfaces, while leaves may collect behind vehicles, beside generators, around trees, or inside landscaping. These small areas are where completion percentages often stall.
Use the progress indicator as a checklist rather than waiting until the end. When the game highlights a missed weed, approach it with the string trimmer and make short controlled movements. For leaves, build a clear path before activating the blower. Blowing randomly can spread debris away from the tarp and create extra work.
The official Lawn Mowing Simulator 2 Steam page describes leaf blowing, tarps, rakes, changing gardens, and new lawn-care tasks as part of the sequel’s expanded career experience.
| Problem Area | Recommended Method | Why It Works |
|---|---|---|
| Fence line | Trim first, mow second | Removes narrow weeds before the mower passes |
| Tree base | Create a wide buffer | Prevents repeated precision corrections |
| Parking posts | Work around each post separately | Keeps the mower away from tight obstacles |
| Bushes and flower beds | Use the trimmer and rake carefully | Reduces the chance of disturbing landscaping |
| Leaves under vehicles | Rake outward, then blow | Opens a route toward the tarp |
| Large open leaf field | Use broad blower sweeps | Builds a concentrated collection area |
Place the tarp near the center of the cleanup area only when the surrounding space is open. Near walls or vehicles, place it where the final leaf route has a clear approach.
A practical cleanup loop is:
- Pull leaves out of corners with the rake.
- Blow loose leaves away from obstacles.
- Push the leaves toward the tarp in several small waves.
- Check behind the truck, posts, bushes, and generators.
- Collect the tarp only after the visible worksite is clear.
This approach prevents the blower from scattering leaves into locations you already completed. It also makes the final inspection easier because each section has a defined cleanup boundary.
Business Progression and Contract Checklist
The sequel’s career mode is designed around growing a lawn-care business rather than completing isolated mowing activities. The launch information lists 31 contracts across 11 locations, with residential, commercial, and municipal work. Gardens can also change over time, adding features such as flower beds, above-ground pools, or flagpoles that alter future routes.
That variety makes consistency more valuable than speed alone. Learn how to complete a clean contract with the starting equipment, then use later jobs to improve route planning and tool management.
First Contract Checklist:
- Read the mowing, weed, leaf, and disposal requirements
- Identify every tool and place the tarp near a practical route
- Create an outer mowing pass before cutting the center
- Inspect trees, fences, posts, bushes, and hard surfaces
- Return equipment and leave with the truck after completion
| Progress Area | What to Track | Improvement Target |
|---|---|---|
| Mowing accuracy | Missed strips and uneven passes | Use consistent lines and a defined perimeter |
| Tool control | Time spent switching or repositioning | Stage tools near the next task |
| Weed completion | Small patches in cracks and edges | Inspect with highlights before leaving |
| Leaf disposal | Scattered piles and hidden debris | Build one route toward the tarp |
| Business growth | New locations and contract variety | Adapt the route to each changing garden |
Do not judge a contract only by how quickly it ends. A repeatable route with fewer missed areas gives you a stronger foundation for larger locations and changing garden layouts.
The launch lineup includes more equipment than the original game had at release, with additional post-release additions planned by the developer. That means early habits should focus on transferable skills: reading terrain, protecting landscaping, controlling debris, and finishing the full worksite rather than only the most visible lawn area.
Lawn Mowing Simulator 2 Business FAQ
Q: How do I start a lawn mowing business in Lawn Mowing Simulator 2?
Begin by selecting a contract, reviewing its requirements, choosing the available equipment, and completing the mowing and cleanup objectives. Return the tools and leave with the truck to close the job.
Q: What should I do first on a new lawn?
Inspect the objectives and make an outer pass around the main work area. Clear weeds and narrow edges near obstacles before using the mower across the center.
Q: Which tool handles weeds and tight borders?
The string trimmer is designed for stubborn weeds on grass, drives, patios, cracks, and other areas the mower cannot reach cleanly.
Q: How do I collect leaves efficiently?
Place the tarp near a clear approach, use the rake for corners, and blow leaves in controlled sweeps toward the tarp. Check around vehicles, bushes, posts, and generators before finishing.
Treat every contract as a small business operation: plan the route, protect the property, control the debris, and verify the requirements before departure.